CB-1 Cold-baking Varnish Gloss (Part A)

OdenkanLacquer Paint

35ml container

This listing is only forPart A (CB-1). Part B (CB-2) is required for use.

Made in Taiwan

1. 2K Clear(Part A) needs to be mixed with a hardener (Part B). The recommended mixing ratio is 1.5 (2K Clear) to 1 (Hardener) by volume.

2. Apply 1-2 wet coats at 18 psi (1.2 bar) until the desired surface is achieved.

3. Our paint is pre-thinned for 0.5mm airbrushes. For 0.3mm airbrushes, add additional thinner to improve flow and consistency.

4. Allow 48 hours to cure.

5. After mixing, use it within 12 hours. To prevent any residue, thoroughly clean the airbrush immediately after use. We recommend using SC-01 Tool Cleaner.

This product has been discontinued. Once we’ve , we will not be restocking.

SKU	CB-01-ODKN

*Not eligible for discounts.